- Easy to transport - Modular design
- Easily adaptable to existing cabins
- Its drilling angle is limited only by the cabin
- You choose the Drill / Compressor combination you want
- Bionic arm
- Rod feeder
- Compact and Lightweight
- Heliportable
This lightweight PK642-Coring drill rig can be virtually installed anywhere: skid; cabin; platform; truck; outlander or other way. We can supply it build on platform (skid, cabin) attached together OR by modules.
This drilling unit is modular designed and assembled as follows:
- Component # 1: Power Pack complete unit
- Component # 2: Base attachment and complete drilling feed boom
- Component # 3: Full operating hydraulic control panel
- Component # 4: Platform (Optional)
- Component # 5: Outriggers (Optional)
Approximate weights:
Platform = 5000 lbs
Outriggers = 1000 lbs
Base attachment = 2500 lbs
Control panel = 800 lbs
Drilling feed boom = 6000 lbs
Power pack unit = 4000 lbs
All connectors between the parts are hydraulic couplings (quick connectors) for easy disassembly when needed. The mast structure can be designed for a drill pipe of 3.00 m <> 10’ or for a drill pipe of 6.00 m <> 20’.
CHARACTERISTICS:
Carrier : Skid
Drilling techniques : Diamond core (RC optional)
Drilling applications : Mineral exploration and other mining applications
Drilling Capacity
Technique |
Diameter |
Depth* dry hole |
Depth* fluid filled |
Diamond Core |
B |
5000 ft (1525 m) |
5755 ft (1755 m) |
|
N |
3640 ft (1100 m) |
4190 ft (1280 m) |
|
H |
2860 ft (870 m) |
3305 ft (1100 m) |
|
p |
1370 ft (420 m) |
1565 ft (480 m) |
Reverse Circulation |
4" (100 mm) |
1310 ft (400m) |
* -Due to highly variable conditions, the capacities should be considered simply as guidelines.
1. POWER PACK UNIT
-
Diesel power unit
- Electronic diesel engine (24 volts) turbocharged water cooled
- Power 156 hp – 116 kw @ 2000rpm
- Fuel consumption 11.2 L/hr <> 2.67 gal/hr
- Fuel tank: 227 L <> 60 galls
- Emission certification: U.S. EPA Tier 3, EU Stage III
- Filtering system two stage (Primary @ security)
- Integrated safety control panel, 24 volts
2. Hydraulic power unit & components
- Two (2) variable displacement piston pumps, load sensing, pressure compensated, and one (1) gear pump dedicated for accessories.
- Hydraulic tank capacity 227 L. <> 60 gall.
- Hydraulic oil cooler
- Filtration system ( 5 micron )
- Body valves assembly for complete controls (Tram, positioning and drilling)
- Automatic lubricator for the down the hole hammer
- Parker « seal lock » hose and fittings
- Integrated safety system, over heat, low levels etc.
3. MAST & FEED ASSEMBLY
- Dump ( 0 to 100° from the horizontal)
- Specific heavy duty mast structure designed for drill pipe of 3.00 m <> 10’ or for a drill pipe of 6.00 m <> 20’
- Drill Head travel length «Stroke» of ( 4.57 m <> 15’), (7 m <> 23 ft) stroke optional
- Feed system hoisting and pull-down power is provided by link- chain that use a powerful hydraulic cylinder controlled hydraulically for accurate trust
- Pull down force (42 000 Lbs <> 186.8 KN)
- Pull back capacity (42 000 Lbs <> 186.8 KN)
- Top drive mounting plate is equipped with urethane anti-wear slides
- Sliding plate is equipped with 90° frontal tilt casing collection
- Additional Jib hydraulic winch 4 400 lbs <> 1996 kg
- Total pull back force with extra winch (46 400 lbs <> 206.4 KN)
- Deflector/Collector: standard for easy maintenance
- Rod feeder to load and unload drill rods on feed is mounted on the side of the mast
4. DRILL HEAD
- Two speeds hollow spindle rotary drive, variable/reversible hydraulic motor
- Automatic constant rotation power control
- 1st gear: Max torque 7500 LBF-ft (10170Nm) at 5000psig (345bar) max speed 250rpm
- 2nd gear: Max torque 1300 LBF-ft (1763 Nm) at 5000psig (345bar) max speed 1500rpm
5. ROD CLAMPS & BREAKOUT: Hydraulic jaws
- Hydraulic centralizer with retractable jaws with max. opening of (8 3/4"–222 mm)
- Hydraulic « Breakout » system
- Manual guide centralizer
- Operated from control panel
6. Rod Feeder
- Rod feeder to load and unload drill rod is mounted on the side of the mast for handy operation and better production
- All functions are hydraulic and controlled from remote panel
7. Rod Handling «Robot Arm»
- Capacity of 230 kg (507 lbs)
- Reach 3.80 m <>12’-5”
- 360º Rotation
- Can manipulate pipes on the ground or in the pipe rack up to 114 mm Ø ( 4½ '')
- Hydraulically controlled from remote panel
8. WATER INJECTION
- Duplex or Triplex stainless steel pistons pump (Water, water mist, foams, bentonite, etcc…)
- Complete filtering system
9. HYDRAULIC PQ CHUCK
- Chuck, hydraulically opened, nitrogen gas spring or spring closed
- Axial holding capacity up to 222.400 N <>50 000 Lbf
10. WIRELINE HOIST
- Line pull bare drum 990 kg (2190 lbf)
- Line pull full drum 227 kg ( 502 lbf)
- Line speed bare drum 145 m/min (475 ft/min)
- Line speed full drum 433 m/min (1422 ft/min)
- Cable 4.9mm (3/16’’) swaged, capacity 1890 m (6200 ft)
11. GROUND STABILISATION SYSTEM
- Hydraulic jacks
- Automatic leveling system
12. PIPE RACK
- Steel rack with capacity for 50 rods of 104 mm <> 4”
- Hydraulic tilt
13. CONTROL PANNEL
- Remote control, ergonomic design for complete operations
- Fully electric
- Remote control with aluminum corpus, heated inside to avoid condensation
14. MISCELLANEOUS
- Color: Novamac’s blue or Caterpillar’s yellow
- Operating and maintenance manual with complete parts catalogue in English or French
- Limited warranty
- Factory training
- On-site commissioning is available
- Suggested parts list (One year service maintenance)